vintage 70s dress vintage 70s sequin maxi dress by Malcolm Starr
SKU: 92265063076
vintage 70s dress

vintage 70s dress vintage 70s sequin maxi dress by Malcolm Starr

Sale price$22.22 Regular price$24.69
Save 10%
Size: 4

Pay in installments of $6.17 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 1 - Jul 6

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

vintage 70s dress vintage 70s sequin maxi dress by Malcolm StarrFrom our Stylist's Collection An iconic Elinor Simmons for Malcolm star maxi dress from the 1970s. Fully detailed with sequins, the printed jersey knit dress features a lush Asian inspired print. Full sleeves, a high neck, and a center front slit adds to the glamour. The dress closes up the back with a zipper, and is fully lined. CONDITION In great condition with wear consistent with age and use. No flaws noted. SIZE & MEASUREMENTS Approximate Size

From our Stylist's Collection

An iconic Elinor Simmons for Malcolm star maxi dress from the 1970s. Fully detailed with sequins, the printed jersey knit dress features a lush Asian inspired print. Full sleeves, a high neck, and a center front slit adds to the glamour. The dress closes up the back with a zipper, and is fully lined.

CONDITION

In great condition with wear consistent with age and use. No flaws noted.

SIZE & MEASUREMENTS

Approximate Size Small
Bust 34 inch 86.4 cm
Waist 28 inch 71.1 cm
Hips 36 inch 91.4 cm
Length 54.5 inch 138.4 cm
Shoulders 15 inch 38.1 cm
Outer Sleeves 23.5 inch 59.7 cm
Neck Length 2 inch 5.1 cm
Zipper 22 inch 55.9 cm

*** Note the fabric has a knit stretch.

Dresses

  • Bust measured across the front from armpit to armpit. Double the measurement for size. 
  • Length measured down the center of the back from the top neck seam to the bottom of the garment. 
  • Waist measured across the dress on the waist seam, or wear the waist would naturally lie. Double for size. 
  • Hips measured across the dress at the fullest part of the hips (approximately 7-9 inches below the waist).  Double for size. 
  • Sleeves measured down the underarm from the armpit to the end of sleeve.
  • Outer sleeve measured from the shoulder seam to the end of sleeve down the outside of the arm. 
  • Shoulders measured between shoulder seams on the backside. 
  • Center of Neck to Cuff measured from the back center of the neck down the outside of the arm to the end of the sleeve. 
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 92265063076

Discover Niche Categories That Outsell vintage 70s dress

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 1713 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
R
RWells
West Palm Beach, US
★★★★★ 3
Higher resistance than expected
Size: 14AWG-50FT, Size: 14AWG-50FT
I like Nilight products, I really do, but this one isn’t as good as it could be. After reading other reviews I wanted to take a different test approach and measure the resistance of the whole roll. I thought this might explain the low rating of 5.6A at 12V. I believe my test explains this rating. First, you need to make sure you understand that this is copper clad aluminum. It is clear in the ad title but make sure you are good with that. The test consisted of me removing the entire 50 feet of wire from the spool to reach the other end. I then stripped back the end and tied the two together securely. Only soldering would have produced a more complete contact. I then tested the resistance of the roll with an Agilent U251B multimeter which gave the reading in the pic of .75ohms. That’s not much but compared to what I found on several charts that was high. The average resistance of 14 gauge 41 strand copper wire should be 2.63ohms per 1000 feet or .1315 per 50 feet. The wire tested 5.7 times greater resistance. Obviously aluminum will test with more resistance than pure copper but I was unable to find what those values should be. The insulation is thick and durable so abrasion wear shouldn’t be an issue if routed properly. The wire may still be great for your application but if you are considering pushing this wire to the load limit you may want to upsize to 12 gauge.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 27, 2024
M
Verified Purchase
matt
Lake Worth, US
★★★★★ 5
Best lights you can get for the best pricing!
Color: 5in Round LED Pod, Color: 5in Round LED Pod
I have had man different off road lights over the years for many different vehicles. Let me tell you about these 5” aux beams. I ordered these lights to go on my 2500 as ditch lights and I am beyond impressed! The lights showed up well packaged. When opening the box, the instructions where right on top and by far one if the easiest sets of instructions I’ve had for wiring diagrams. The lights were packaged and wrapped in foam all the way around to protect them from shipping. The wrapping of the lenses for scratch prevention was perfect. The included wiring harness was packed in a bag and laid out very easily for installation. The harness hooked to the battery and then to the lights with easy quick connects and had more than enough length to put the lights anywhere. Once they were mounted and installed I hooked them up to my aux beams switch panel with ease. Now for the lights! The brightness is beyond bright enough to see miles away! These lights will shine anything you could ever want to see. The spot flood combo work exceptionally well for all situations and darkness. The side shooter stretch them beam out to the sites and can see all the way across. The running lights tie in very easy with your turn signals for extra turn lights or running lights. Heavy duty is an understatement for the quality of these lights. I’m still running them after several months with no water intrusion and still as bright as the day I installed them. The price for what you get, is far beyond better than other top brands! I will be buying more of these for my next off roading set up!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 23, 2025
L
Verified Purchase
Levi Payne
Belleville, US
★★★★★ 5
Too big for a tiger, but works well on the fiddy
Color: 4*2.5in Cube LED Pod
Not as bright as the graph says they are, or maybe I'm not in a dark enough area at night. But they definitely are blinding. Were too big for my adv bike unfortunately, but they work good on my truck as ditch lights. Not too bulky looking like the cubes are and no wind noise that I can hear. Definitely lights up the wma trails and the side shooters are very helpful. I will note though that as soon as your hood gets dusty it becomes blinding from the inside side shooters though. so I painted the yellow lens cover on the inside sides and it helps a lot with the hood glare.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2026
S
Verified Purchase
Scott Liske
Port Orchard, US
★★★★★ 5
Bright
Color: 7*5in Cube LED Pod
Very bright, good quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026
R
Verified Purchase
Riik
Port Orchard, US
★★★★★ 5
Easy to install
Color: 4*2.5in Cube LED Pod
Definitely more than I expected. .. dang good product and easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 11, 2026

recommand products